Unbuild It | Episode 163: Back to Basics: Vapor Control Layers Explained
It is truly sad that vapor is so misunderstood in buildings. To quote Steve: "It's just not the big bad monster everyone in our industry thinks it is. Vapor is not a liability; it is an asset." In most buildings and most climates, it is drying assemblies by way of vapor diffusion that keeps them safe if--or more accurately--when they get wet. To be fair, the code language requiring interior vapor retarders on the warm-in-winter side of building assemblies for many many years was wrong, confusing, and not based on building science.
If focusing on vapor means how it contributes to drying--not wetting--then we need to know the vapor permeability of EACH AND EVERY layer in any building assembly. So, where do we get that info? For generic materials, go to the BSC Building Materials Property Table (see resource below). For specific building materials, go to manufacturer tech support and demand vapor permeability standardized test results for every material they sell you.
Finally: building professionals and homeowners need to know the moisture content of the air in their buildings and many buildings don't have built-in hygrometers as part of their thermostats. Measuring humidity electronically is not easy so accurate hygrometers can't be had for a Jackson; more like a C-note...
PETE'S RESOURCES:
- Water in Buildings: An Architect's Guide to Moisture and Mold - https://www.wiley.com/en-us/shop/general-introductory-architecture/water-in-buildings-an-architect's-guide-to-moisture-and-mold
- "Vapor Profiles Help Predict Whether a Wall Can Dry" - https://www.greenbuildingadvisor.com/article/vapor-profiles-help-predict-whether-a-wall-can-dry
- ICC Digital Codes R702.7 Vapor retarders - https://codes.iccsafe.org/s/IRC2021P2/part-iii-building-planning-and-construction/IRC2021P2-Pt03-Ch07-SecR702.7 NOTE: NOT required in wall assemblies in Climate Zones 1 - 3.
- BSC Building Material Property Table - https://buildingscience.com/documents/information-sheets/building-materials-property-table
-"Measuring (and Understanding) Humidity" - https://www.greenbuildingadvisor.com/article/measuring-and-understanding-humidity
- NOTE: For building science geeks: "ASTM E96: Explaining Water Vapor Transmission Rate Testing" - https://blog.ansi.org/ansi/explaining-water-vapor-testing-astm-e96/
- BuildingScienceAdvisor - https://bsa.ornl.gov.
Huge thanks to our episode sponsor, Diamond Kote. Learn more at: https://diamondkotesiding.com/
Episodes
Unbuild It | Episode 167: Tricky but Cool Assemblies: Vented Over-Roofs & Double-Stud Walls
Episode 167
In this episode of the UnBuild It Podcast, the guys dive into roof ventilation strategies for standing seam metal roofs, including vent spacing, underlayments, and night sky radiation. They also debate double-stud wall assemblies versus ZIP-R sheathing and exterior mineral wool insulation, exploring the pros, cons, costs, and practical challenges of each approach.
Unbuild It | Episode 165: Confusing the cost and value of building science-based, better-performing homes
Episode 165
Steve and Jake emphasize the value of building science in delivering affordable high-performance homes, regardless of client budgets. Additional resources provided by Pete for further reading.
Unbuild It | Episode 164: Thermal Control Layers Explained
Episode 164
In the final episode of the Back to Basics series, Steve, Jake, and Pete break down the thermal control layer, from insulation and R-values to thermal bridging and continuity. Learn why effective thermal performance depends on all four building control layers—water, air, vapor, and thermal—working together.
Unbuild It | Episode 162: Back to Basics: Air Control Layers Explained
Episode 162
The boys break down key building science principles for creating effective control layers, with a special focus on airtightness. From maintaining continuity and simplifying installation to blower door testing and understanding what drives air leaks, this episode offers practical guidance for building tighter, better-performing homes.
Share on facebook
Tweet
Email
Share on Linkedin