Unbuild It | Episode 167: Tricky but Cool Assemblies: Vented Over-Roofs & Double-Stud Walls
Venting the top side of a roof assembly--particularly with a standing seam metal roof--involves quite a few decisions: depth of vent space, types of furring (criss-cross vs. 45 degree angle) or spacer mesh, roofing underlayments for both the structural sheathing and the nailbase sheathing. And for standing seam metal roofs, there is the added factor night sky radiation. The boys duke it out on this one.
On to double-stud wall assemblies. There is the relentless comparison of double stud walls to either Huber ZIP-R or mineral wool XCI. Now that gets the blood boiling! When all is said and done: there are pros and cons to ANY building system. It's all about constructability, cost, climate, and familiarity with the trades!
PETE'S RESOURCES:
- "Roof Vent Over" (Steve Baczek YouTube): https://www.youtube.com/watch?v=HFVWHbX1Emk
- "Nocturnal radiation cooling tests" (ScienceDirect) - https://pdf.sciencedirectassets.com/277910/1-s2.0-S1876610212X00213/1-s2.0-S1876610212016219/main.pdf
- GBA "Double-Stud Wall vs. Exterior Insulation:" https://www.greenbuildingadvisor.com/article/double-stud-wall-vs-exterior-insulation
NOTE: I know that this GBA article is behind the pay wall (GBA Prime). But this is the best info resource for this comparison.
- ZIP-R Installation Manual: https://www.huberwood.com/uploads/documents/technical/ZIP-System-R-sheathing-Installation-Manual.pdf
NOTE: for the best way to deal with panel gaps go to pages 12 and 48.
- ZIP Sheathing Installation Manual - https://www.huberwood.com/zip-system/wall-sheathing
NOTE: Huber stands by their install of ZIP tape down to 0 degrees F. But you better bring your A-game when it is that cold. Make sure that everything is really clean and dry (no frost) and apply both a ton of pressure and maybe a hair dryer for the bond!
Episodes
Unbuild It | Episode 165: Confusing the cost and value of building science-based, better-performing homes
Episode 165
Steve and Jake emphasize the value of building science in delivering affordable high-performance homes, regardless of client budgets. Additional resources provided by Pete for further reading.
Unbuild It | Episode 164: Thermal Control Layers Explained
Episode 164
In the final episode of the Back to Basics series, Steve, Jake, and Pete break down the thermal control layer, from insulation and R-values to thermal bridging and continuity. Learn why effective thermal performance depends on all four building control layers—water, air, vapor, and thermal—working together.
Unbuild It | Episode 162: Back to Basics: Air Control Layers Explained
Episode 162
The boys break down key building science principles for creating effective control layers, with a special focus on airtightness. From maintaining continuity and simplifying installation to blower door testing and understanding what drives air leaks, this episode offers practical guidance for building tighter, better-performing homes.
Share on facebook
Tweet
Email
Share on Linkedin