Unbuild It | Episode 166: Why is Steve so angry?
For those of you not interested in Steve's anger, pass Go but do not collect $200. The rest of you sit back and listen to just how hard it is to be either a high performance architect or builder when much of the world around you:
- does not know what high performance means;
- does not understand that all good things take time;
- want the best of everything but is completely unwilling to pay for it.
Jake brings up the extremes regarding spray foam ("it solves everything and is bloody magical" or "it kills the planet and your clients").
It is not clear if this podcast episode either helped Steve with his anger or will help you with yours. Good luck...
PETE'S RESOURCES:
- "Foam-In-Place Insulation: 7 Tips for Getting Injection and Spray Foam Right:" https://www.buildinggreen.com/blog/foam-place-insulation-7-tips-getting-injection-and-spray-foam-right
- Two building industry organizations with both company and installer 3rd-party certification programs for spray foam:
- Air Barrier Association of America (ABAA): https://airbarrier.org
- Spray Polyurethane Foam Alliance (SPFA): https://www.sprayfoam.org
- ASHRAE Standard 160 - https://webstore.ansi.org/standards/ashrae/ansiashraestandard1602009
- JLC "Overdriven Fasteners in ZIP Sheathing - https://www.jlconline.com/how-to/framing/overdriven-fasteners-in-zip-system-sheathing_o/
Episodes
Unbuild It | Episode 167: Tricky but Cool Assemblies: Vented Over-Roofs & Double-Stud Walls
Episode 167
In this episode of the UnBuild It Podcast, the guys dive into roof ventilation strategies for standing seam metal roofs, including vent spacing, underlayments, and night sky radiation. They also debate double-stud wall assemblies versus ZIP-R sheathing and exterior mineral wool insulation, exploring the pros, cons, costs, and practical challenges of each approach.
Unbuild It | Episode 165: Confusing the cost and value of building science-based, better-performing homes
Episode 165
Steve and Jake emphasize the value of building science in delivering affordable high-performance homes, regardless of client budgets. Additional resources provided by Pete for further reading.
Unbuild It | Episode 164: Thermal Control Layers Explained
Episode 164
In the final episode of the Back to Basics series, Steve, Jake, and Pete break down the thermal control layer, from insulation and R-values to thermal bridging and continuity. Learn why effective thermal performance depends on all four building control layers—water, air, vapor, and thermal—working together.
Unbuild It | Episode 162: Back to Basics: Air Control Layers Explained
Episode 162
The boys break down key building science principles for creating effective control layers, with a special focus on airtightness. From maintaining continuity and simplifying installation to blower door testing and understanding what drives air leaks, this episode offers practical guidance for building tighter, better-performing homes.
Share on facebook
Tweet
Email
Share on Linkedin