Unbuild It | Episode 164: Thermal Control Layers Explained
R-value is only part of the story.
In the final episode of the Back to Basics series, Steve, Jake, and Pete tackle the thermal control layer—and why good insulation means very little if the rest of the building enclosure isn't working with it.
The boys break down heat flow, insulation, thermal bridging, and the importance of maintaining a continuous thermal control layer throughout the building. As with water, air, and vapor, continuity matters: transitions, penetrations, framing, windows, doors, and other interruptions can undermine an otherwise well-insulated assembly.
But thermal performance isn't simply about chasing higher R-values. The conversation gets into making intelligent decisions about where insulation belongs, how different materials and assemblies actually perform, and why the thermal layer has to be considered as part of the whole building rather than as an isolated specification.
And that brings the four-part series full circle. Control liquid water first. Control air movement. Understand vapor and drying potential. Then manage heat flow. The best-performing buildings come from getting all four control layers continuous—and getting them to work together.
This is Part 4 of the Back to Basics series covering the four fundamental building control layers: Water, Air, Vapor, and Thermal.
Huge thanks to our episode sponsor, Ring’s End. Learn more at: https://www.ringsend.com/.
PETE'S RESOURCES:
BSC - Thermal Control: Insulation & Thermal Bridges https://buildingscience.com/sites/default/files/08_Insulation_Thermal_Bridges.pdf
BSI-062 - Thermal Bridges Redux https://buildingscience.com/documents/insights/bsi-062-thermal-bridges-redux
Building America Solution Center - Continuous Rigid Insulation Sheathing https://basc.pnnl.gov/resource-guides/continuous-rigid-insulation-sheathing
BSI-001 - The Perfect Wall https://buildingscience.com/documents/insights/bsi-001-the-perfect-wall
GBA - Thermal Bridging https://www.greenbuildingadvisor.com/article/thermal-bridging
Episodes
Unbuild It | Episode 167: Tricky but Cool Assemblies: Vented Over-Roofs & Double-Stud Walls
Episode 167
In this episode of the UnBuild It Podcast, the guys dive into roof ventilation strategies for standing seam metal roofs, including vent spacing, underlayments, and night sky radiation. They also debate double-stud wall assemblies versus ZIP-R sheathing and exterior mineral wool insulation, exploring the pros, cons, costs, and practical challenges of each approach.
Unbuild It | Episode 165: Confusing the cost and value of building science-based, better-performing homes
Episode 165
Steve and Jake emphasize the value of building science in delivering affordable high-performance homes, regardless of client budgets. Additional resources provided by Pete for further reading.
Unbuild It | Episode 162: Back to Basics: Air Control Layers Explained
Episode 162
The boys break down key building science principles for creating effective control layers, with a special focus on airtightness. From maintaining continuity and simplifying installation to blower door testing and understanding what drives air leaks, this episode offers practical guidance for building tighter, better-performing homes.
Share on facebook
Tweet
Email
Share on Linkedin