Unbuild It | Episode 162: Back to Basics: Air Control Layers Explained
The boys come up with some great generalities for at least three of the control layers in this episode:
- Staying in the same plane makes it easier to achieve continuity.
- Easier to install means greater chance of success.
- Combining control layers (in one component or material) means if you get continuity in one control layer, you get it in the next.
- Eliminate confused spaces: every space is either inside or outside the building (examples: attics, crawlspaces...).
And specific to air control:
- Blower doors do not lie: it is the best and the only way to really know how airtight your building is.
- Use blower doors quantitatively (the ACH50) but, just as importantly, find the leaks--how many, how big, locations (qualitative blower door results).
- Rarely can just one blower door test cut it - opportunities arise early and later during construction to increase airtightness.
- Air leaks are based on these phenomena: wind, stack effect, fans. Understand and respect each one.
- Two half-assed air control layers do not equal one good one.
- In renovation: blower door test 1st; air seal 2nd; THEN insulate.
Huge thanks to our episode sponsor, Diamond Kote. Learn more at: https://diamondkotesiding.com/
PETE'S RESOURCES:
- EPA – Moisture Control Guidance for Building Design, Construction, and Maintenance: https://www.epa.gov/indoor-air-quality-iaq/moisture-control-guidance-building-design-construction-and-maintenance-0
- Energy Star Thermal Bypass Checklist: https://basc.pnnl.gov/library/thermal-bypass-checklist-guide
- "A House Needs to Breathe...Or Does It? An Introduction to Building Science" (Allison Bailes): https://www.amazon.com/dp/1958711128?lv=shuf&channelId=500&plpRedirect=mhFallback
Episodes
Unbuild It | Episode 167: Tricky but Cool Assemblies: Vented Over-Roofs & Double-Stud Walls
Episode 167
In this episode of the UnBuild It Podcast, the guys dive into roof ventilation strategies for standing seam metal roofs, including vent spacing, underlayments, and night sky radiation. They also debate double-stud wall assemblies versus ZIP-R sheathing and exterior mineral wool insulation, exploring the pros, cons, costs, and practical challenges of each approach.
Unbuild It | Episode 165: Confusing the cost and value of building science-based, better-performing homes
Episode 165
Steve and Jake emphasize the value of building science in delivering affordable high-performance homes, regardless of client budgets. Additional resources provided by Pete for further reading.
Unbuild It | Episode 164: Thermal Control Layers Explained
Episode 164
In the final episode of the Back to Basics series, Steve, Jake, and Pete break down the thermal control layer, from insulation and R-values to thermal bridging and continuity. Learn why effective thermal performance depends on all four building control layers—water, air, vapor, and thermal—working together.
Share on facebook
Tweet
Email
Share on Linkedin