UnBuild It | Episode 137: Another Two-Fer: Thermally Broken Basement Slab-to-Superior Wall Panel Connection and Exterior Sump Pumps
Register for Build Show LIVE 2025 HERE
DESCRIPTION: All 3 UBIP podcasters are fond of the Superior Wall System, but connecting the extended "foot" of the foundation wall panel to the basement slab is a bit tricky. But not for Steve, but of course. And while sump pumps OUTSIDE are a mystery to Pete, Jake & Steve walk Pete through it. And a bonus: using gravel to spread the structural load and better manage the water load. All that and a "joke" by Steve to-just-die-for... Huge thanks to our episode sponsor, Arclin.
PETE'S RESOURCES:
- Superior Wall resources on slab-to-panel connections - https://weaverprecast.com/wp-content/uploads/2017/11/Pouring-the-Concrete-Floor-Slab.pdf & https://www.superiorwalls.com/api/getFile/19
- Outdoor sump pumps - https://zoellerathome.com/2024/08/27/why-install-sump-pump-outside/
- Sump Pump Guide - https://www.wefppvl.org/WEF-PPVL-library/wp-content/uploads/2016/02/Edmonton_AB_Sump_Pump_Maintenance_and_Replacement_Guide.pdf
- "Angle of Repose" by Wallace Stegner - https://www.google.com/books/edition/Angle_of_Repose/yHBxSNd3rzoC?hl=en&gbpv=0
Arclin
Episodes
Unbuild It | Episode 167: Tricky but Cool Assemblies: Vented Over-Roofs & Double-Stud Walls
Episode 167
In this episode of the UnBuild It Podcast, the guys dive into roof ventilation strategies for standing seam metal roofs, including vent spacing, underlayments, and night sky radiation. They also debate double-stud wall assemblies versus ZIP-R sheathing and exterior mineral wool insulation, exploring the pros, cons, costs, and practical challenges of each approach.
Unbuild It | Episode 165: Confusing the cost and value of building science-based, better-performing homes
Episode 165
Steve and Jake emphasize the value of building science in delivering affordable high-performance homes, regardless of client budgets. Additional resources provided by Pete for further reading.
Unbuild It | Episode 164: Thermal Control Layers Explained
Episode 164
In the final episode of the Back to Basics series, Steve, Jake, and Pete break down the thermal control layer, from insulation and R-values to thermal bridging and continuity. Learn why effective thermal performance depends on all four building control layers—water, air, vapor, and thermal—working together.
Unbuild It | Episode 162: Back to Basics: Air Control Layers Explained
Episode 162
The boys break down key building science principles for creating effective control layers, with a special focus on airtightness. From maintaining continuity and simplifying installation to blower door testing and understanding what drives air leaks, this episode offers practical guidance for building tighter, better-performing homes.
Share on facebook
Tweet
Email
Share on Linkedin