Share on facebook
Tweet
Email
Share on Linkedin
Unbuild It | Episode 164: Thermal Control Layers Explained
R-value is only part of the story.
In the final episode of the Back to Basics series, Steve, Jake, and Pete tackle the thermal control layer—and why good insulation means very little if the rest of the building enclosure isn't working with it.
The boys break down heat flow, insulation, thermal bridging, and the importance of maintaining a continuous thermal control layer throughout the building. As with water, air, and vapor, continuity matters: transitions, penetrations, framing, windows, doors, and other interruptions can undermine an otherwise well-insulated assembly.
But thermal performance isn't simply about chasing higher R-values. The conversation gets into making intelligent decisions about where insulation belongs, how different materials and assemblies actually perform, and why the thermal layer has to be considered as part of the whole building rather than as an isolated specification.
And that brings the four-part series full circle. Control liquid water first. Control air movement. Understand vapor and drying potential. Then manage heat flow. The best-performing buildings come from getting all four control layers continuous—and getting them to work together.
This is Part 4 of the Back to Basics series covering the four fundamental building control layers: Water, Air, Vapor, and Thermal.
Huge thanks to our episode sponsor, Ring’s End. Learn more at: https://www.ringsend.com/.
PETE'S RESOURCES:
BSC - Thermal Control: Insulation & Thermal Bridges https://buildingscience.com/sites/default/files/08_Insulation_Thermal_Bridges.pdf
BSI-062 - Thermal Bridges Redux https://buildingscience.com/documents/insights/bsi-062-thermal-bridges-redux
Building America Solution Center - Continuous Rigid Insulation Sheathing https://basc.pnnl.gov/resource-guides/continuous-rigid-insulation-sheathing
BSI-001 - The Perfect Wall https://buildingscience.com/documents/insights/bsi-001-the-perfect-wall
GBA - Thermal Bridging https://www.greenbuildingadvisor.com/article/thermal-bridging
Sponsors
Episodes
Unbuild It | Episode 162: Back to Basics: Air Control Layers Explained
Episode 162
The boys break down key building science principles for creating effective control layers, with a special focus on airtightness. From maintaining continuity and simplifying installation to blower door testing and understanding what drives air leaks, this episode offers practical guidance for building tighter, better-performing homes.
Unbuild It | Episode 159: 3Qs: Climate Zone 7 T&G Ceiling, Aging in Place Design, and Alternative PreFab Foundations
Episode 159
This Q&A episode tackles listener questions on ZIP sheathing vs. Smart Vapor Retarder for cold-climate ceilings, zero-threshold exterior doors and Universal Design, and innovative wood-based alternatives to concrete foundations. The discussion wraps up with a look at below-grade SIP foundation systems and plenty of valuable resources for deeper exploration.
Unbuild It | Episode 158: The Doctor is In - Retired building scientist and pulmonary physician Nathan Yost
Episode 158
Steve and Pete welcome Nathan Yost to discuss Multiple Chemical Sensitivity (MCS), exploring how building materials, indoor environments, and evolving medical understanding can impact those living with sensitivities. Nathan shares insights from years of working with clients, while Steve recounts recent projects where MCS dramatically influenced design decisions, specifications, and material choices—including one project in a surprising "dead zone."
